A single component, urethane modified alkyd with excellent resistance to alcohol and cleaning materials. For inside and outside areas above the waterline requiring a beautiful durable varnish. Quick-drying to an extremely hard and durable high gloss/ satin surface, highly resistant to wear and abrasion within hours of application.
Minimum application temperature: 5°C.
Thinner/Tool cleaner: Thinner No 1
Temp | Touch dry | Re-coat (min/max) |
---|---|---|
10° | 4 - 6 hours | 8 hours / 4 days |
20° | 2 - 3 hours | 4 hours / 2 days |
Tools:
A two component polyurethane varnish. Use inside and outside above the waterline. Use where a hard, extremely durable and long lasting finish is required. Highly resistant to abrasion and chemicals, for the ultimate finish in durability and beauty.
For professional use only.
Minimum application temperature: 5°C.
Thinner/Tool cleaner: Thinner No 2 (brush) / Thinner No 6 (spray)
Covers: 12.5 m²/ltr
Temp | Touch dry | Re-coat (min/max) |
---|---|---|
10° | 12 hours | 32 hours / 10 days |
20° | 6 hours | 16 hours / 5 days |
Tools:
A single component waterborne, acrylic varnish, offering a durable finish with high resistance to water and UV damage. For use above the waterline. Use on new and previously varnished wood, inside and out. Particularly good for use on interior areas as there is no solvent odour during application. Overcoating times and waterborne properties enable 2 to 3 coats to be applied in one day. Low VOC.
Minimum application temperature: 5°C.
Thinner/Tool cleaner: Water
Covers: 12 m²/ltr
Temp | Touch dry | Re-coat (min/max) |
---|---|---|
10° | 2 - 4 hours | 4 hours / 12 days |
20 ° | 1 - 2 hours | 2 hours / 6 days |
Tools:
Unpigmented teak oil with good penetration to protect wood and make it easier to clean. Helps wood resist both water and dirt, and underlines its original structure. Use to overcoat Teak Colour Restorer on areas of high usage. Not suitable for use on painted or varnished surfaces.
Apply one saturation coat onto cleaned new wood, previously oiled or preserved wood. Let the Teak Oil soak into the wood, then remove surplus oil with a clean cloth.
Minimum application temperature: 5°C.
Tools:
Pigmented teak oil with good penetration, giving teak surfaces a golden brown colour and a uniform finish. It can be used on teak decks and other wood surfaces.
Apply one or more coats, depending on absorption of wood, onto cleaned new wood, previously oiled or preserved wood. Wipe off surplus with a clean cloth.
Minimum application temperature: 5°C.
Tools:
A powder for cleaning all teak areas. Especially good for large areas such as decks, and for wood thats turned dark grey. Removes dirt and marks, giving a clean surface ready for you to apply Hempel's Teak Colour Restorer or Hempel's Teak Oil.
Wet the surface with fresh water and apply a uniform layer of Hempel's Teak Cleaner. Leave on for 10-20 minutes, using a stiff brush to scrub while the paste is still moist. Throughly hose down with clean fresh water before the paste hardens.
Tools:
Aerosol. An anti-corrosive primer for a large variety of substrates. Particularly recommended as a primer for outdrives and propellers. Hempel's Prop Primer has very good adherence to most substrates. Fast drying, easy to apply with a matt finish. Overcoat with appropriate antifouling.
Temp | Touch dry | Re-coat (min/max) |
---|---|---|
10° | 40 minutes | 2 hours - none |
20° | 20 minutes | 1 hour - none |