Topcoats

Brilliant Gloss is a high gloss alkyd topcoat with excellent colour retention. Flexible and resistant to salt water and pollutants. Easy application ensures an exceptional finish. For exterior and interior use above the waterline.

Minimum application temperature: 5°C.

Thinner/Tool cleaner: Thinner No 1 (brush) / Thinner No 3 (spray)

Covers: 11 m²/ltr

Temp	Touch dry	Re-coat (min/max)
10°	8 hours	20 hours / 6 days
20°	4 hours	10 hours / 3 days

Tools:

Colours: Materhorn white Pure white Polar white Pale grey Black Cream Britannia blue Souvenirs blue Cobalt blue Ice blue Marine green Survival orange Radiant red

High gloss two component enamel, especially suited for application by brush and roller. Excellent colour and gloss retention. Resistant to salt water and spillage of mineral oil. Easy application ensures exceptional finish.

Minimum application temperature: 5°C.

Thinner/Tool cleaner: Thinner No 2 (brush) / Thinner No 6 (spray)

Covers: 10.4 m²/ltr

Temp	Touch dry	Re-coat (min/max)
10 °	16 hours	24 hours / 60 days
20°	8 hours	12 hours / 30 days

Tools:

Colours: Polar white Black Cream Cobalt blue Radiant red Off white

Superyacht finish for smaller leisure boats.
Ocean Gloss is a fast drying, high gloss two component polyurethane topcoat with excellent gloss and colour retention. Highly durable and protects against degradation and abrasion. For use above the waterline. Especially suited for spray application.

Minimum application temperature: 5°C.

Thinner/Tool cleaner: Thinner No 6, Thinner No 7, Thinner No 2

Covers: 15 m²/ltr

Temp	Touch dry	Re-coat (min/max)
10°	10 - 12 hours	12 hours / 14 days
20°	3 - 4 hours	6 hours / 7 days

Tools:

Colours: Pure white

A single component semi-gloss topcoat and primer. Ideal for all areas above the waterline requiring a durable semi-gloss finish. Can be applied directly to most surfaces. Can be used as a complete coating system on new or bare wood:1st coat thinned 20%, 2nd cost thinned 5-10%, further coats undiluted. Add Anti-Slip granules for a non-slip finish.

Minimum application temperature: 5°C.

Thinner/Tool cleaner: Thinner No 1 (brush) / Thinner No 3 (spray)

Covers: 11.5 m²/ltr

Temp	Touch dry	Re-coat (min/max)
10°	6 - 8 hours	16 hours / 10 days
20°	3 - 4 hours	8 hours / 5 days

Tools:

Colours: White

A single component high opacity satin topcoat providing excellent durability, with good water and oil resistance for bilges and lockers. Not suitable for permanent immersion.

Minimum application temperature: 5°C.

Thinner/Tool cleaner: Thinner No 1 (brush) / Thinner No 3 (spray)

Covers: 12 m²/ltr

Temp	Touch dry	Re-coat (min/max)
10°	6 hours	16 hours / 10 days
20°	3 hours	8 hours / 5 days

Tools:

Colours: White Light grey